Solar controller PWM Geti GSR010 with indication of charging, current consumption and battery voltage. Designed for system voltage 12V or 24V with fixed operating parameters and maximum charging and load current 10A for panels up to 120W-12V or 240W-24V.
Brief description of PWM controllers: PWM solar controllers connect solar panels directly to the charged battery and after reaching the set or given terminal voltage of the battery, the subsequent control is solved by pulse limitation-current interruption. This happens at a frequency of units up to tens of kHz and is indicated by an LED. The controllers are suitable for panels with the same system voltage as the battery voltage, otherwise there are losses when part of the power is wasted due to inappropriate VA characteristics of the panel.

Product parameters:

- simple solar PWM controller for lead batteries
- LED indication
- protection against battery polarity reversal, overload and short circuit
- automatic disconnection at low voltage
- reverse current blocking
- battery status indicator

Technical parameters:

- maximum charging current: 10 A
- working temperature: -40 +50 ° C
- max. Conductor cross section: 16 mm2
- nominal battery voltage: 12V / 24V auto. detection
- types of batteries: liquid electrolyte / gel battery
- increased voltage:
14.5V / 29V liquid electrolyte
14.3V / 28.6V gel battery
- low voltage disconnection: 11V / 22V voltage controlled
- low voltage for reconnection: 12.8V / 25.6V
- protection: against battery polarity reversal, overload and short circuit
- dimensions: 86 × 68 × 36 mm
- product weight: 120 g