It is a wireless gas detector, which can function independently or as an accessory for alarms iGET SECURITY. According to the location it is possible to detect natural gas LNG, CNG, carbon monoxide CO, Coal, Coal gas, wood gas, propane, butane LPG and oil products. Gas detector is already an integral part of homes, cottages, apartments, garages, etc.

Use them in many ways:

- Gas cooker in the kitchen
- U of fireplaces, stoves
- In boilers for wood, pellet, coal, gas
- In the garage for a car with LPG

Features:

- The detector is designed into all the rooms where it is necessary monitoring gas level
- When it detects the gas flashes red warning LED and siren triggers the detector
- The detector is also possible to connect wirelessly to the alarm iGET SECURITY M2B and thus be guaranteed comprehensive protection. Alarm signal after receiving the alarm will also trigger a siren and sends SMS about this fact
- The detector operates at a frequency of 433 MHz, due to this it can be used with many other brands alarms that operate on the same frequency
- Easily extend the basic set alarm iGET SECURITY
- Contains the test button to check the functionality

Possible placement and utilization of the detector:

Gases that are lighter than air, rises, a detector placed to the ceiling:

- Place the detector to a height of 15-30 cm below the ceiling, and 60 cm from the corners, therefore, from the places where two walls converge. Must be a minimum distance. 1.2 meters from the gas source to prevent false alarms

These are:

- Natural Gas LNG, CNG
- Carbon monoxide CO, Coal, Coal gas, wood gas

The gases that are heavier than air, descend to the ground, a detector placed on the ground:

- Place the detector to a height of 15-30 cm above the ground, and 60 cm from the corners, that is from the places where the two walls converge. Must be a minimum distance. 1.2 meters from the gas source to prevent false alarms

These are:

- Propane gas LPG
- Hydrocarbons

Technical information: